If the heat sealing cold cutting bag making machine produces non-printed bags with different lengths, it can be checked and adjusted from the following two aspects.
- Mechanical parts
A. Check whether the pressure of the plastic rubber roller is good or not. If the pressure is too loose, some bags will be slippery. If the pressure is not enough, they will not be delivered.
B. The place where the material is fed at the back should not be too heavy (the mat should not be too heavy). If the feeding place is too heavy, the pressure of the plastic rubber roller will also cause the bag to slip. - The electrical part
A. Check the stepper motor, driver, servo motor, servo driver. If the current is not enough, the torque is not enough, and the film is not delivered in place, it will cause the length of the bag. If the motor and driver are damaged, there will be abnormal sound, and there may be a clicking sound when feeding.
B. Check the parameter settings, such as frequency and gear. If the frequency is set too high and the material is pulled too fast and the mechanical resistance is relatively large, the bag length will be shortened.
If the length of the printed bags produced by the heat sealing cold cutting bag making machine is different, you can check and adjust from the following three aspects:
A.Check if there is no error when making non-printed bags.
B.Check whether the photoelectric color mark tracking is off the mark. Some printing bags with small strips may be off-label.
C.Check for printing errors.
English
العربية
Nederlands
Français
Deutsch
Italiano
Português
Русский
Español
7 Responses
Good post. I learn something totally new and challenging on blogs I stumbleupon everyday. Its always useful to read through content from other authors and practice something from other sites.
Itís hard to find knowledgeable people for this topic, but you seem like you know what youíre talking about! Thanks
Thanks for your blog, nice to read. Do not stop.
Next time I read a blog, I hope that it does not fail me just as much as this particular one. I mean, I know it was my choice to read, however I truly thought you would probably have something interesting to say. All I hear is a bunch of crying about something that you could fix if you were not too busy searching for attention.
Nice post. I learn something totally new and challenging on blogs I stumbleupon on a daily basis. It will always be interesting to read content from other writers and use something from other sites.
Itís nearly impossible to find educated people in this particular subject, however, you seem like you know what youíre talking about! Thanks
Wow! This can be one particular of the most useful blogs We’ve ever arrive across on this subject. Actually Wonderful. I am also an expert in this topic therefore I can understand your hard work.